For more detailed information, please reference the 2022 Ford Mustang Mach-E Owner’s Manual.
REMOTE CONTROL LIMITATIONS
 WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada’s technical specifications were met. |
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Make sure a valid remote control is within 3 ft (1 m) from the front door handles and rear of the vehicle.
The system may not function if:
- The remote control remains stationary for about a minute.
- The vehicle battery has no charge.
- The remote control battery has no charge.
- There is interference causing issues with the remote control frequencies.
- The remote control is too close to metal objects or electronic devices, for example, keys or a cell phone.
USING THE REMOTE CONTROL
Use your remote control to access various vehicle systems.
Note: The buttons on your remote may vary depending on the vehicle region or options.
One-Stage Unlocking
 Press the button to unlock all doors. |
Two-Stage Unlocking (If Equipped)
| Press the button to unlock the driver’s door. Press the button again within three seconds to unlock all doors. |
Lock
 Press the button to lock all doors. |
Panic Alarm
 Press the button to sound the panic alarm. |
Liftgate
 Press the button twice to open the liftgate. |
SOUNDING THE PANIC ALARM
Note: The panic alarm only operates when the vehicle is off.
LOCATING YOUR VEHICLE
| Press the lock button twice within three seconds. The turn signal lamps flash. We recommend you use this method to locate your vehicle. |
CHANGING THE REMOTE CONTROL BATTERY
| WARNING: Keep batteries away from children to prevent ingestion. Failure to follow this instruction could result in personal injury or death. If ingested, immediately seek medical attention. WARNING: If the battery compartment does not securely close, stop using the remote control and replace it as soon as possible. In the meantime, keep the remote control away from children. Failure to follow this instruction could result in personal injury or death. |
The remote control uses one coin-type 3-volt lithium battery, CR2450, or equivalent.
- Push the release button and pull the key blade out.
2. Twist a thin coin under the tab hidden behind the key blade head to remove the battery cover.
- Insert a screwdriver in the position shown and carefully remove the battery.
- Insert a new battery with the + facing upward.
- Reinstall the battery cover onto the remote control and install the key blade.
Note: Refer to local regulations before you dispose of the remote control batteries.
Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board.
Note: Replacing the remote control battery does not erase the programmed key from your vehicle. The remote control operates as normal.
Note: A message appears in the information display when the remote control battery is low.
REPLACING A LOST KEY OR REMOTE CONTROL
You can purchase replacement keys or remote controls from an authorized dealer. Authorized dealers can program remote controls for your vehicle.
PROGRAMMING THE REMOTE CONTROL
Contact an authorized dealer to program remote controls for your vehicle.
KEYS AND REMOTE CONTROLS – INFORMATION MESSAGES
| Message | Action |
|---|---|
| Key Battery Low Replace Soon | Replace the remote control battery. |