2022 Ford Mustang Mach-E MyKey Guide

For more detailed information, please reference the 2022 Ford Mustang Mach-E Owner’s Manual.

WHAT IS MYKEY

MyKey allows you to program keys and mobile devices with restricted driving modes to promote good driving habits.

NON-CONFIGURABLE MYKEY SETTINGS

Seatbelt Reminder or Belt-Minder™

MyKey mutes the audio system until the front seat belts are buckled.

Note:   If your vehicle includes an AM/FM radio or a very basic audio system, then the radio may not mute.

Satellite Radio (If Equipped)

Some Satellite radio channels have restricted access to adult radio content.

Driving and Parking Aids

Settings for parking aids, blind spot information system, and cross-traffic alert cannot be configured. These systems turn on when the vehicle turns on and cannot be switched off with a MyKey.

Settings for pre-collision assist and lane-keeping cannot be configured. These systems turn on when the vehicle turns on but can be switched off with a MyKey.

A new destination in the navigation system can only be set using voice commands when using a MyKey, and with your vehicle moving.

Note:   MyKey drivers may be able to turn the lane departure warning feature off, but this feature turns back on automatically with every new key cycle.

CONFIGURABLE MYKEY SETTINGS

You can configure the following settings after creating a MyKey.   See   Creating a MyKey

Speed Limit

WARNING   WARNING:  Do not set MyKey maximum speed limit to a limit that will prevent the driver from maintaining a safe speed considering posted speed limits and prevailing road conditions. The driver is always responsible to drive in accordance with local laws and prevailing conditions. Failure to do so could result in an accident or injury.

You can set a speed limit for your vehicle. Warning messages appear on the touchscreen and a tone sounds if your vehicle reaches the set speed. You cannot override the set speed when using a MyKey.

Speed Minder

You can set a speed reminder for your vehicle. Warning messages appear on the touchscreen and a tone sounds if your vehicle exceeds the set speed.

Audio System Volume Limit

The audio system’s maximum volume reduces. A message appears on the touchscreen if you attempt to exceed the volume limit. The automatic volume control turns off.

Emergency Assistance

If you set emergency assistance to always-on, you cannot switch it off with a MyKey.

Do Not Disturb

If you set do not disturb to always-on, you cannot switch it off with a MyKey.

Note:   If a phone is connected using Apple CarPlay or Android Auto while driving with a MyKey, the driver can receive phone calls and text messages even if the do not disturb restriction is on. And if the vehicle comes with satellite radio, there is no restriction on the adult content.

CREATING A MYKEY

Note:   You can use these instructions to create a MyKey for either a passive key or a mobile device.

  1. Raise the center console storage compartment lid.
  2. Remove the key blade from the remote control and place the remote control in the position shown.
  3. Switch the ignition on using the key you want to create as MyKey.
  4. Press Settings on the touchscreen.
  5. Press Vehicle Settings.
  6. Press MyKey.
  7. Press Create MyKey or Create MyKey Mobile Device.
  8. Press Yes.
  9. Switch the ignition off.

Note:   You successfully created a MyKey. We recommend that you label this key so you can distinguish it from the admin keys.

Note:   You can use both a passive key and a mobile device as a MyKey. You must have a second passive key and create it as a MyKey.

Note:   The programmed restrictions apply when you switch the vehicle off, open and close the driver door and restart your vehicle with the passive key or mobile device.

PROGRAMMING A MYKEY

You can program any remote control to become MyKey restricted but you must leave one unmodified as an admin key.

  1. Switch the vehicle on using an admin key.
  2. Access the vehicle drawer on the touchscreen.
  3. Press SETTINGS.
  4. Press Vehicle.
  5. Press MyKey.
  6. Select a setting and press the OK button.
  7. Configure the setting.

CLEARING ALL MYKEYS

When you clear all MyKeys, you remove all restrictions and return all MyKeys to their original admin key status.

  1. Switch the vehicle on using an admin key.
  2. Access the vehicle drawer on the touchscreen.
  3. Press SETTINGS.
  4. Press Vehicle.
  5. Press MyKey.
  6. Press Clear All MyKeys.
  7. Press Yes.

CHECKING MYKEY SYSTEM STATUS

You can find information about the distance traveled using a MyKey, and the number of admin keys and MyKeys created for your vehicle.

  1. Switch the vehicle on.
  2. Access the vehicle drawer on the touchscreen.
  3. Press SETTINGS.
  4. Press Vehicle.
  5. Press MyKey.
  6. Press MyKey Information.

USING MYKEY WITH REMOTE START SYSTEMS

MyKey is not compatible with unapproved, aftermarket remote start systems. If you choose to install a remote start system, see an authorized dealer for an approved remote start system.

MYKEY – INFORMATION MESSAGES

Message  Description  
Place Key in Backup LocationDisplays when trying to create a MyKey and the admin key is not placed in the backup position.   See   Creating a MyKey.   
Key is Already a MyKeyDisplays when trying to create a MyKey with a key already designated as a MyKey.  
This Key restricted at Next Key Cycle. Label Key as MyKeyDisplays to confirm that the key is restricted after you switch the vehicle off.  

MYKEY – FREQUENTLY ASKED QUESTIONS

What is an admin key? An admin key is a key that you have not created as a MyKey.

Why am I not able to create a MyKey?The admin key is not placed in the backup position. The key used to switch the vehicle on is not an admin key. The key used to switch the vehicle on is the only admin key. There has to be at least one admin key. You did not switch the vehicle off after creating the last MyKey.

Why am I not able to program a MyKey?The admin key is not inside your vehicle. The key used to switch the vehicle on is not an admin key. No MyKeys are created.

Why am I not able to clear the MyKeys?The admin key is not inside your vehicle. The key used to switch the vehicle on is not an admin key. You have not created any MyKeys.

Why is the MyKey distance not accumulating? The key used to start the vehicle is an admin key. An admin key and a MyKey are inside your vehicle. No MyKeys are created. You have cleared the MyKeys.

Why am I not able to start the vehicle with a MyKey?An admin key and a MyKey are inside your vehicle. The system recognizes only the admin key when both are present.