WHAT IS THE KEYLESS ENTRY KEYPAD
The keyless entry keypad allows you to lock and unlock your vehicle using the keypad on the window trim.
KEYLESS ENTRY KEYPAD LIMITATIONS
The system may not function if:
- The vehicle battery has no charge.
LOCATING THE KEYLESS ENTRY KEYPAD
The keypad is near the driver’s window and illuminates when you touch it.
KEYLESS ENTRY KEYPAD MASTER ACCESS CODE
What Is the Master Access Code
The master access code is a factory-set five-digit entry code. You can operate the keypad with the master access code at any time. The master access code is on the owner’s wallet card in the glove box and is available from an authorized dealer.
KEYLESS ENTRY KEYPAD PERSONAL ACCESS CODES
Programming a Personal Entry Code
- Enter the five-digit master code.
- Press 1·2 on the keypad within five seconds.
- Enter your personal five-digit code. You must do this within five seconds of completing Step 2.
- Press 1·2 on the keypad to save personal code 1.
The doors lock and then unlock to confirm that programming was successful.
To program additional personal entry codes, repeat Steps 1 through 3, then for Step 4:
- Press 3·4 to save personal code 2.
- Press 5·6 to save personal code 3.
- Press 7·8 to save personal code 4.
- Press 9·0 to save personal code 5.
If your vehicle comes with SYNC, you can also program the system with a personal entry code.
Hints:
- Do not set a code that uses five of the same number.
- Do not use five numbers in sequential order.
- The five-digit master code works even if you have set your own personal code.
Erasing a Personal Code
- Enter the five-digit master code.
- Press and release 1·2 on the keypad within five seconds.
- Press and hold 1·2 for two seconds. You must do this within five seconds of completing Step 2.
All personal codes erase and only the five-digit master code works.
Anti-Scan Feature
The keypad goes into an anti-scan mode if you enter the wrong code seven times. This mode turns off the keypad for one minute and the keypad lamp flashes.
The anti-scan feature turns off after:
- One minute of keypad inactivity.
- You press the unlock button on the remote control.
- You switch the ignition on.
- You unlock your vehicle using keyless entry.
USING THE KEYLESS ENTRY KEYPAD
Unlocking the Doors
Enter the factory-set five-digit code or your personal code.You must press each number within five seconds of each other.
- Press 3-4 within five seconds to unlock all doors.
Locking the Doors
Press and hold 7·8 and 9·0 at the same time with the driver’s door closed.
Note: You do not need to enter the code first.
KEYLESS ENTRY KEYPAD – FREQUENTLY ASKED QUESTIONS
Why does the keypad not accept the access code? If you enter the access code too fast on the keypad, the unlock function may not work. Slowly re-enter the access code.
Why does the keypad not function? The keypad goes into an anti-scan mode if you enter a wrong code seven times. The anti-scan mode disables the keypad for one minute and the red light flashes.
For more detailed information, please reference the 2022 Ford Mustang Mach-E Owner’s Manual.