STARTING AND POWERING OFF PRECAUTIONS
- The system may not function if the remote control is close to metal objects or electronic devices, such as keys or a cell phone.
- A valid remote control must be inside your vehicle to switch the power on and start your vehicle.
- Remote controls left inside your vehicle when locked are disabled. A message may appear in the information display indicating that there is no key detected when you try to start your vehicle. Press the unlock button on the remote control to enable it, and then start your vehicle.
- Make sure all occupants fasten their seat belt.
- Make sure the headlamps and electrical accessories are off.
- Make sure the parking brake is on.
- Make sure the vehicle is in park (P).
STARTING THE VEHICLE
- Fully press the brake pedal.
Note: Do not touch the accelerator pedal.
- Press the push button start.
You can also start your vehicle using Valet Mode or a Backup Start Passcode. See Phone as a Key.
POWERING OFF
 WARNING: Do not switch off your vehicle when it is moving. This results in a significant decrease in braking and steering assistance. If the vehicle is switched off, some electrical circuits, for example, airbags, could also turn off. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death. |
Note: If you unintentionally switch your vehicle off, shift into neutral (N) and restart your vehicle.
When your vehicle is not moving and is started, or the power is in accessory mode, press and release the push button to start without pressing the brake pedal. This shuts off the vehicle and all electrical accessories.
When your vehicle is moving, press the push button start three times within two seconds, or press and hold for at least one second. Shift into neutral (N) and use the brakes to bring your vehicle to a safe stop. When your vehicle comes to a complete stop, shift into park (P).
RESTARTING THE VEHICLE AFTER POWERING OFF
Fast Restart
The fast restart feature allows you to restart your vehicle within 10 seconds of switching it off, even if it does not detect a valid remote control.
Within 10 seconds of switching your vehicle off, press the brake pedal and press the push button start. After 10 seconds, you can no longer start your vehicle if it does not detect a valid remote control.
Once your vehicle starts, it remains on until you press the push button start, even if it does not detect a valid remote control.
If you open and close a door while your vehicle is on, the system searches for a valid remote control. You cannot start your vehicle if the system does not detect a valid remote control within 10 seconds.
ACCESSING THE PASSIVE KEY BACKUP POSITION
If you are unable to start your vehicle, follow the steps below.
- Open the floor console storage compartment lid.
- Place the remote control in the slot as shown with the buttons facing upward.
- With the remote control in this position, press the brake pedal, then press the push button start to switch the power on and start your vehicle.
STARTING AND POWERING OFF – FREQUENTLY ASKED QUESTIONS
Why does the vehicle not start? The system does not function if the remote control frequencies are jammed, or if the remote control battery has no charge. See Accessing the Passive Key Backup Position.
For more detailed information, please reference the 2022 Ford Mustang Mach-E Owner’s Manual.