OPENING AND CLOSING THE WINDOWS
Press the window control switch to open the window. Lift the window control switch to close the window.
Note: The power windows operate with the ignition on, and for several minutes after you switch the ignition off or until you open a front door.
To reduce wind noise or pulsing noise when one window is open, slightly open the opposite window.
One-Touch Open
Fully press the window control switch and release it. Press again or lift it to stop the window.
One-Touch Close
Fully lift the window control switch and release it. Press again or lift it to stop the window.
Resetting One-Touch Close
Carry out all steps within 30 seconds of starting the sequence.
- Close the window.
- Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a few seconds.
- Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a few seconds.
- Press and hold the window control switch until the window is fully open. Keep the window control switch pressed for a few seconds.
- Lift and hold the window control switch until the window is fully closed. Keep the window control switch held for a few seconds.
Note: Repeat the procedure if the window does not close when you use one-touch.
WHAT IS GLOBAL OPENING AND CLOSING
You can use the remote control to open the windows with the ignition off.
USING GLOBAL OPENING
- Press and release the unlock button on the remote control.
- Press and hold the unlock button on the remote control.
- Release the button when the windows start to open.
Press the lock or the unlock button on the remote control to stop global opening.
Note: You can use global opening for a short period of time when you unlock your vehicle using the remote control.
SWITCHING GLOBAL OPENING ON AND OFF
- Access the vehicle drawer on the touchscreen.
- Press Settings.
- Press Vehicle.
- Press Windows.
- Switch Remote Open on or off.
USING GLOBAL CLOSING
- Press and hold the lock button on the remote control.
- Release the button when the windows start to close.
Press the lock or the unlock button on the remote control to stop global closing.
Note: Bounce-back is on during global closing. See What Is Window Bounce-Back.
SWITCHING GLOBAL CLOSING ON AND OFF
- Access the vehicle drawer on the touchscreen.
- Press Settings.
- Press Vehicle.
- Press Windows.
- Switch Remote Close on or off.
WHAT IS WINDOW BOUNCE-BACK
The window stops and reverses if it detects an obstruction when closing.
OVERRIDING WINDOW BOUNCE-BACK
- Close the window until it reaches the point of resistance and let it reverse.
- Lift and hold the window control switch within two seconds to override bounce-back and close the window. Bounce-back is now disabled and you can close the window manually.
Note: The window goes past the point of resistance and you can fully close it.
Note: If the window does not close, have your vehicle checked as soon as possible.
LOCKING THE REAR WINDOW CONTROLS
When the rear window lock/child safety lock switch is engaged, the window switches mounted on the rear door panels are deactivated.

The control is on the driver’s door. It enables both the rear window locks and the child safety locks.
Press the control to switch the rear window locks and child safety locks on. Press the control again to switch them off. A light on the control illuminates when you switch them on.
The rear window lock and child lock settings remain active when you switch off your vehicle.
For more detailed information, please reference the 2022 Ford Mustang Mach-E Owner’s Manual.