WHAT IS BLIND SPOT INFORMATION SYSTEM
Blind spot information system detects vehicles that may have entered the blind spot zone.
HOW DOES BLIND SPOT INFORMATION SYSTEM WORK
Blind spot information system uses sensors on both sides of your vehicle, detecting rearward from the exterior mirrors to approximately 13 ft (4 m) beyond the rear bumper. The detection area extends to approximately 59 ft (18 m) beyond the rear bumper when the vehicle speed is greater than 30 mph (48 km/h) to alert you of faster approaching vehicles.
BLIND SPOT INFORMATION SYSTEM PRECAUTIONS
 WARNING: Do not use the blind spot information system as a replacement for using the interior and exterior mirrors or looking over your shoulder before changing lanes. The blind spot information system is not a replacement for careful driving. WARNING: The system may not operate properly during severe weather conditions, for example snow, ice, heavy rain and spray. Always drive with due care and attention. Failure to take care may result in a crash. |
Note: Blind spot information system does not prevent contact with other vehicles. It does not detect parked vehicles, pedestrians, animals or other infrastructure.
BLIND SPOT INFORMATION SYSTEM LIMITATIONS
Blind spot information system does not operate in park (P) or reverse (R).
The system may not alert you if a vehicle quickly passes through the detection zone.
Note: For vehicles without blind spot information system with trailer coverage, aftermarket trailer tow modules or tow bars may interfere with the system. In this situation it is recommended that you switch the system off when you attach a trailer. For vehicles with a trailer tow module and tow bar approved by the manufacturer, the system automatically turns off when you attach a trailer.
BLIND SPOT INFORMATION SYSTEM REQUIREMENTS
Blind spot information system turns on when all the following occur:
- You start your vehicle.
- You shift into drive (D).
- The vehicle speed is greater than 6 mph (10 km/h).
SWITCHING BLIND SPOT INFORMATION SYSTEM ON AND OFF
To switch blind spot information system on or off, use the touchscreen:
- Access the vehicle drawer.
- Press SETTINGS.
- Press Driver Assistance.
- Switch Blind Spot Information System on or off.
Note: Some vehicles may not have the ability to switch the feature on or off.
When you switch blind spot information system off, a warning lamp illuminates. When you switch the system on or off, the alert indicators flash twice.
Note: The system remembers the last setting when you start your vehicle.
To permanently switch the system off, contact an authorized dealer.
LOCATING THE BLIND SPOT INFORMATION SYSTEM SENSORS
The sensors are behind the rear bumper on both sides of your vehicle.
Note: Keep the sensors free from snow, ice and large accumulations of dirt.
Note: Blocked sensors may affect system accuracy.
Note: Do not cover the sensors with bumper stickers, repair compound or other objects.
Note: Bike and cargo racks could cause false alerts due to obstruction of the sensor. We recommend switching the feature off when using a bike or cargo rack.
Note: The system may not correctly operate when towing a trailer. For vehicles with a trailer tow module and tow bar approved by us, the system turns off when you attach a trailer. For vehicles with an aftermarket trailer tow module or tow bar, we recommend that you switch the system off when you attach a trailer.
If the sensors become blocked, a message may appear in the instrument cluster display. See Blind Spot Information System – Information Messages. The alert indicators remain illuminated but the system does not alert you.
BLIND SPOT INFORMATION SYSTEM INDICATORS
 When blind spot information system detects a vehicle, an alert indicator illuminates in the exterior mirror on the side the approaching vehicle is coming from. If you turn the turn signal on for that side of your vehicle, the alert indicator flashes. |
BLIND SPOT INFORMATION SYSTEM – INFORMATION MESSAGES
| Message | Action |
|---|---|
| Blind Spot System Fault | A fault with the system has occurred. Have your vehicle checked as soon as possible. |
| Blind Spot Not Available Sensor Blocked See Manual | Something is blocking the sensors. Clean the sensors. |