Mustang Mach-E One Pedal Drive Guide

WHAT IS ONE PEDAL DRIVE

One pedal drive allows you to accelerate, slow down and stop using only the accelerator pedal. Pressing the accelerator down accelerates your vehicle, releasing pressure on the accelerator with your foot still on the pedal slows down your vehicle, and releasing the pedal ultimately allows your vehicle to come to a complete stop if the road grade is not excessively steep.  See   One Pedal Drive Precautions

ONE PEDAL DRIVE PRECAUTIONS

WARNING   WARNING:  This system is an extra driving aid. It does not replace your attention and judgment, or the need to apply the brakes. This system does NOT automatically brake your vehicle. If you fail to press the brake pedal when necessary, you may collide with another vehicle.

Shifting into neutral (N) does not hold your vehicle at a standstill.

Shifting into drive (D) or reverse (R) does not cause the vehicle to move if the accelerator pedal is not pressed.

Note:   Always check the transmission selection before accelerating.

Note:   Switch off one pedal drive before entering a car wash.

ONE PEDAL DRIVE LIMITATIONS

One pedal drive is unavailable when any of the following occur:

  • Shifting into an incorrect transmission position, such as park (P) when driving.
  • Using active park assist.
  • Using cruise control.
  • Selecting a drive mode other than engage, whisper, or unbridle. For example unbridle extend (GT only) disables one pedal drive.
  • Turning off stability control.

Releasing the accelerator pedal may not bring your vehicle to a complete stop on steep grades.

Increased vehicle load may reduce accelerator pedal ability to slow the vehicle.

SWITCHING ONE PEDAL DRIVE ON AND OFF

  1. Access the vehicle drawer on the touchscreen.
  2. Press CONTROLS.
  3. Press Drive Modes.
  4. Switch 1-Pedal Drive on or off.

ONE PEDAL DRIVE INDICATORS

One-Pedal Drive  When one pedal drive is active, the indicator displays in the instrument cluster.